Polyester elastomer
One or two braids of aramid fiber
Polyurethane - orange - black inkjet branding
High voltage equipment - Safety and rescue equipment - Aerial platforms - Cranes - Equipment requiring electrical high insulation
Aramid reinforcement for high pressure performance - Lightweight - Flexible - Compact - Bonded construction - Orange cover - Non pin-pricked - Abrasion resistant
Meets or exceeds SAE 100R8 - High pressure hose suitable for petroleum or synthetic based hydraulic fluids used in hydraulic applications requiring electrical high insulation or non-conductivity in high tension environment e.g. near electrical power lines. Approved by MSHA - Mine Safety and Health Administration - number IC-305.
-40 °C to 100 °C (-40 °F to 212 °F): limited to 70 °C ( 158 °F) for water based fluids
-0,93 bar; -700 mm Hg|-13,5 psi; -27,5 inch Hg
SAE 100R8 // EN855-R8 // ISO3949-R8
Hoses meet standards SAE J517/J343 and EN855 for non conductivity where maximum electrical leakage shall not exceed 50μA when a 152 mm sample is subject to 37.5 KV for 5 minutes equivalent to 250 KV/meter.
- TO HYDRAULIC - Part No - R8 NON CONDUCTIVE - SAE 100R8-Dash Size - Inch Size - DN Size - WP bar / psi - MSHA IC-305 - MADE IN ITALY - www.transferoil.com - Batch No
